Description
In this workshop we will use different Zirconium processing techniques. From infiltration to ceramic building , we will play both side. To complete our training, we will discover IPS e.max ZirCAD Prime, the new Zirconium CAD CAM disc presented at IDS 2019.
Trainer
Ivoclar Vivadent Representative
Audience
Dental Technicians
Level
Dental technician with basic skill
Objective
This workshop aims to discover the various possibilities with IPS e.max ZirCAD.
Products & materials
In order to optimize the rendering of your work, the complete range of IPS e.max Ceram IPS Selection and IPS Ivocolor will be available during this training.
Description
During this training, we will have the opportunity to reduce the incisal edge of an IPS e.max Press Multi anterior unit restoration and reconstruct it with the components of the IPS e.max Selection and IPS Ivocolor Shades & Stains kits.
Trainer
Ivoclar Vivadent Representative
Audience
Dental Technicians
Level
Dental technician with average skill
Objective
Optimizing the esthetic performance of full ceramics restorations by adopting the IPS e.max Press Multi Press ingot is to ensure an infallible result quality in a minimum of time.
Products & materials
In order to optimize the rendering of your work, the complete range of IPS e.max Ceram IPS Selection and IPS Ivocolor will be available during this training.
Description
During this training, we get to the heart of the matter by performing a simple anterior restoration and a more creative anterior restoration in IPS e.max Press enhanced with ceramics including the Power concept.
Trainer
Ivoclar Vivadent Representative
Audience
Dental Technicians
Level
Dental technician with average skill
Objective
In which cases should I choose the IPS e.max Power Dentine and Power Incisale ceramics? We make this training available to participants who want to understand the Power concept.
Products & materials
In order to optimize the rendering of your work, the complete range of IPS e.max Ceram IPS Selection and IPS Ivocolor will be available during this training.
Voorinschrijving voor de 1-daagse cursus MiYO® Liquid Ceramic systeem.
In verband met grote interesse voor deze cursus, kunt u zich nu al voorinschrijven voor deze cursus om verzekerd te zijn van een plek. Zodra verdere ontwikkelingen rondom het coronavirus en het beleid van de RIVM bekend zijn, zullen wij u tijdig op de hoogte stellen van de cursusdata.
Wellicht heeft u ondertussen van het MiYO Liquid Ceramic systeem gehoord of bent u zelfs gebruiker.
In samenwerking met de firma Jensen, de fabrikant van het MiYO systeem, werken wij momenteel aan het opzetten van cursussen voor dit systeem. Dit is uiteraard nu niet mogelijk in verband met Covid19 en geplande data zijn uiteraard sterk afhankelijk van de verdere ontwikkelingen rondom het coronavirus en het beleid van de RIVM. Dat neemt niet weg dat we ons wel aan het voorbereiden zijn en willen inventariseren hoeveel labs gebruik van deze cursus willen maken.
Er is enorm veel interesse, dus mocht u geinteresseerd zijn dan kunt u zich nu al inschrijven zodat u verzekerd bent van een plek. Wij zullen u dan tijdig informeren over de aanvangsdatum van de cursus.
MiYO® Liquid Ceramic biedt een volledig nieuwe benadering van de esthetiek.
Het gepatenteerde MiYO® Liquid Ceramic System geeft technici de mogelijkheid om op eenvoudige wijze esthetische restauraties te maken die de natuurlijke tanden in een ultradunne laag overtreffen. MiYO werkt momenteel met alle zirkonium- en lithiumdisilicaatmaterialen en is eenvoudig te integreren in elke laboratorium workflow.
Description
The purpose of this workshop is to guide you to create step by step in the realization of 2 single metal ceramic crown. You will be able to test the different possibilities offered by this new ceramic IPS Style and create your own style. After what, your laboratory will benefit from the advantages brought by this creativity
Trainer
Ivoclar Vivadent Representative
Audience
Dental Technicians
Level
Basic
Objective
This introduction training is made to work with our new metal ceramic product(s). The customer will have the opportunity to use our complete range on metal frame work.
Description
Can be held at various training facilities in The Netherlands, this course focuses on the latest developments in IPS e.max Implant solutions together with the IPS e.max Press material. Tuition includes procedures and the correct methods to produce accurate anatomical press frameworks and how to easily produce lifelike results.
Program
This course programme covers the latest developments in the IPS e.max system. Participants will be shown the recommended technique for customising implant abutments using the IPS e.max Press technique.
Each delegate will complete two customised implant abutments with completed crowns. Waxing techniques will then be covered in order to minimalise layering procedures in order to achieve greater control and high aesthetics. Given the correct knowledge of the pressing mechanism clean accurate pressings can be achieved every time.
Participants will be shown how to proceed with the divested pressings with layering materials then will be shown surface texture techniques, staining and glazing.
Trainers
Ivoclar Vivadent Representatives
On special request and on invitation our trainers from our ICDE in Schaan are also available, but due to the high demand and current running course program it will be subject to availabilty only.
Audience
This training program may be more suitable for Dental technicians already experienced with the IPS e.max system.
Level
Basic to Advanced
Objectives
- Understand the significance of accurate anatomic waxing
- Understand the correct procedures for sprueing and investing of waxwork to ensure successful press results
- Learn how to effectively customise implant abutments using the press technique
- Learn how to determine ingot selection given differing tooth preparation shades
- Understand the significance of the different ingot translucencies when matching shades
- Understand the correct procedures for divesting pressed frameworks
- Understand the importance of correct trimming and adjustment of Lithium Disilicate and the adverse effects of incorrect procedures
- Learn how to layer pressed units in order to create realistic results
Description
Can be held at various training facilities in The Netherlands, the focus of this two day course is IPS e.max ZirPress and Ceram the nano fluorapatite glass ceramic, two of the main components of the IPS e.max system. With this in mind this course is devoted to layering and pressing techniques in conjunction with a pre milled IPS e.max Zirconium oxide frameworks.
Program
The initial section of programme covers the preparation of the milled framework. Participants will be shown how to characterise the frameworks in order to alter shading.
The training program will cover in detail ceramic selection and more advanced techniques with which to layer the Zirconium oxide framework. Participants will use press techniques in order to produce realistic full anatomy restorations. The course concludes with techniques used for achieving natural looking surface texture via glazing and polishing.
Trainers
Ivoclar Vivadent Representatives
On special request and on invitation our trainers from our ICDE in Schaan are also available, but due to the high demand and current running course program it will be subject to availabilty only.
Audience
Suitable for both less experienced ceramists and those more experienced, this course provides the perfect introduction to the IPS e.max system.
Level
Basic to Advanced
Objectives
-
- Understand the significance of the Zirconium oxide framework when matching shades.
- Understand the correct procedures for preparing Zirconium oxide frameworks for layering.
- Understand the importance and correct application of IPS e.max Zirliner.
- Understand the correct layering techniques when using IPS e.max Ceram
- Learn the procedure with which to press ceramic to Zirconium oxide using IPS e.max ZirPress.
- Learn how to modify firing parameters in order to achieve more stable results
- Become Familiar with IPS e.max Ceram and all its components
Description
The focus of this course is IPS e.max Press covering procedures for ingot selection; IPS e.max Press multi and IPS e.max press MT and the correct methods used to produce accurate anatomical press frameworks.
Program
Introduction of new IPS e.max Press products requires a different handling. This training will guide you step by step to optimize your final result.
The initial section of programme covers ingot selection methods and waxing techniques in order to minimalise the volume of layering ceramic. Participants will be shown how to determine ingot selection based on wax thickness, underlying tooth colour and desired shade.
The training program will cover in detail spruing and investing techniques and then give a full understanding of how IPS e.max Press is processed. Given the knowledge of the pressing mechanism clean accurate pressings can be achieved every time. Participants will be shown how to proceed with the divested pressings to the point at which they are ready to be layered with ceramic.
Suitable for both less experienced ceramists and those more experienced, this course provides the perfect introduction to the IPS e.max Press system.
Objectives
- Learn how to determine ingot selection given differing tooth preparation shades.
- Understand the significance of the different ingot translucencies when matching shades.
- Understand the correct procedures for divesting pressed frameworks.
- Understand the importance of correct trimming and adjustment of Lithium Disilicate and the adverse effects of incorrect procedures